Front Forks.

[RC4MAN]

Originally Posted by Nikker1985

Hallo once again.

I found this, a 58mm USD by Marzocchi but it is not easy to find it anywhere.
58mm INVERTED FRONT END by MARZOCCHI in ITALY ~Harley:eBay Motors (item 200368711146 end time Aug-06-09 21:36:58 PDT)

Any reviews? Sounds too good to be true...giving them away for 800euros?

There is also a 50mm USD from Marzocchi do you suppose it would fit nicely? The one the Agusta F4 is using. That would be awesome.

Are triple trees easy to find? I d probably have to use different springs due to the extra weight right?

I have done some measuring and CAD work with the intention of building some altered rake trees and because of the frame geometry you'll have to have custom trees machined to use the Marzochhi tubes. To keep the tubes from banging the frame tubes at extreme right/left lock there is about 2.5" of offset, C/L of steering stem to C/L of fork tubes. Your standard USD trees off most sport bikes are very flat with minimal offset. You'l either be banging the frame or adding stops which will even greater limit the fork rotation.
The Storz are designed to bolt on and go, which with the limited market makes them cost what they do. To fit others you'll end up with as much in them as well.

[Nikker1985]

Hallo once again.

This is the one I have been wanting for a long time for my VRSCDX.

It has 50mm tubes. So where do I find triple trees for this thing that also allow me to keep my headlight?

http://www.marzocchi.com/System/57644/Rac-USD-50_4.jpg

More here
Tenneco Marzocchi - Forks - 2010 - RAC USD Ø50 Light