TSII/WEGO mounting locations - V-Nation

sburke91 · 06-18-2008, 08:04 PM

My TS2+/WEGO kit just arrived today. I'm about to install it and was curious where everyone that runs them semi-permenantly mounted are mounting the boxes.

Also, does the accessory circuit provide enough juice to power the WEGO or do I need to go relay/direct line to the battery?

o2man98 · 06-18-2008, 09:26 PM

My WEGO unit is just laying in the front of my airbox next to my rear air compressor.

I used a spare fuse slot in the fuse block for mine.

Rondo · 06-19-2008, 08:43 AM

Ken,
Are those spare fuse locations already hot? How do you tape into those? That sounds like a much better idea than splicing into an already hot wire like the lighting circut. TIA.
Rondo

**rjrivero** · 06-19-2008, 09:07 AM

I used a Posi-Tap. You can get them from Napa and Car quest. You used to be able to get them at Wal-Mart, but they dropped them from thier stores.

You can tap a wire in the fuse area. The Grey one, or the Blue ones will be hot when the igntion is on, but not when the accessories are on. I avoid the guillatine type connectors. They pinch wires, and put weak spots in them.

www.posi-lock.com

**Youngzee** · 06-19-2008, 09:33 AM

I used velcro to attach it to the front of the lower airbox. Fit pretty good.

spinedoc · 06-22-2008, 09:05 AM

front of my lower airbox, heat shrink wrapped just in case. Fits nicely with the million other things I have stuffed in there.

**rjrivero** · 06-26-2008, 10:48 PM

Here you go sean.

Ed-rod · 01-21-2009, 07:16 AM

I put mine on top of the battery w/velcro. Works OK and I can see the LED's.

06-18-2008, 08:04 PM	#1 (permalink)
sburke91 The End is the Beginning Join Date: May 2008 Location: Delaware, OH Posts: 274 Blog Entries: 5	TSII/WEGO mounting locations My TS2+/WEGO kit just arrived today. I'm about to install it and was curious where everyone that runs them semi-permenantly mounted are mounting the boxes. Also, does the accessory circuit provide enough juice to power the WEGO or do I need to go relay/direct line to the battery? __________________ Sean Burke--Delaware OH '04 VSRCA 1300 'Baby Destroyer'

Last edited by sburke91; 06-18-2008 at 08:53 PM.

06-18-2008, 09:26 PM	#2 (permalink)
o2man98 Just the oil guy!!! Join Date: May 2008 Location: Manitowoc, WI Bike: 03 1400cc + Posts: 260	My WEGO unit is just laying in the front of my airbox next to my rear air compressor. I used a spare fuse slot in the fuse block for mine. __________________ Solo Member of the 1402 Club Independent AMSOIL Premier Direct Jobber www.modernoils.com FREE AMSOIL CATALOG-E-mail me at ken@modernoils.com Call me at 920-860-0116 for ordering. Best times will be after 5pm weekdays or anytime weekends. Contact me directly for forum member pricing as Authorized Dealers are not allowed to advertise discounted rates publicly. Get DEALER COST immediately on your first order by following these instructions. Purchase at dealer cost.

06-19-2008, 08:43 AM	#3 (permalink)
Rondo SSN-720 Join Date: May 2008 Location: Colorado Bike: 07 DX Posts: 92	Wego Ken, Are those spare fuse locations already hot? How do you tape into those? That sounds like a much better idea than splicing into an already hot wire like the lighting circut. TIA. Rondo __________________ "Yes, Janet, life's pretty cheap to that type."

06-19-2008, 09:07 AM	#4 (permalink)
rjrivero Love for Jeannie Join Date: May 2008 Bike: 2003 VRSCA Posts: 1,867 Blog Entries: 1	I used a Posi-Tap. You can get them from Napa and Car quest. You used to be able to get them at Wal-Mart, but they dropped them from thier stores. You can tap a wire in the fuse area. The Grey one, or the Blue ones will be hot when the igntion is on, but not when the accessories are on. I avoid the guillatine type connectors. They pinch wires, and put weak spots in them. www.posi-lock.com __________________ American Iron Magazine's V-Rod Editor It's a Turbo thing......so I wouldn't understand. I will no longer be receiving PM's. If you need to contact me, please do so via the email option. Thanks. RJ

06-19-2008, 09:33 AM	#5 (permalink)
Youngzee Just Another Moderator Join Date: May 2008 Location: N.W. LA Bike: '06 D Posts: 2,129 Images: 142	I used velcro to attach it to the front of the lower airbox. Fit pretty good. __________________ '06 D. Works shocks, stock length Progressives, D&D Fatcat with SERT with Twinscan, V-Mod drag bars and some powder coating. Sundowner seat and Kuryakyn tall sissy bar for the wifey CFC Safety Officer haha---hhheeeeuuuuuhhhhhhhrrrrrrr--hehe Big Chief of the Toecutters M/C V-Mergency list

06-22-2008, 09:05 AM	#6 (permalink)
spinedoc (.)(.) Join Date: May 2008 Location: Crapachusetts Posts: 68	front of my lower airbox, heat shrink wrapped just in case. Fits nicely with the million other things I have stuffed in there.

01-21-2009, 07:16 AM	#8 (permalink)
Ed-rod Junior Member Join Date: Jan 2009 Location: Tampa Bike: 2004 B Posts: 8	I put mine on top of the battery w/velcro. Works OK and I can see the LED's. __________________ 2004 B 1177 Mini-stroker VRFID Supertrapp V5 Jones 480/455 58 MM TB CP Pistons SE CNC heads Big bore sleeves and pistons on the shelf..... 1302 pending

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode